| Distributor for Canada |
||
| Mazco Products & Services | ||
| #32 Adamic Cr. |
E-mail: mazcoprod@shaw.ca |
|
| Leduc, Alberta T9E-5H9 |
Tel: 780.690.7504 | |
| Canada | Fax: 780.986.9811 | |
| Distributor for USA |
||
| Groebner & Associates Inc | ||
| Web Site: www.groebner.com | ||
With emphasis on the revised Occupational Health and Safety Codes, worker safety is paramount and every effort to keep workers out of a hazardous gas rich environment must be considered. The environment also wins with the Mazco Safe-T-Stopper products that do not require releases of natural gas into the atmosphere.
We know the historical backgrounds of older distribution systems built by various utility companies and we understand the complexities of renewal to distribution systems and how to provide cost effective solutions.
Our goal is to provide specialty tools to gas distribution companies throughout North America that enhance worker safety, reduce construction costs and contribute to environmental stewardship.
2008-12-09
New "NO TOOLS" Attachment
|
|
We have simplified the Street Tee stopping process and Saddle Clamp removal. Safe-T-Stopper® can now be used on Street Tee removals and Clamp-on Saddle removals without the use of tools. Just attach the Lower Housing using the Overcenter Lockdown Retainer device. It's that simple! |
|
2008-10-06
Web Site Updates
|
|
We have updated our website to better reflect the new tool capability. The text and images found in the street tee connections are easier to follow and provide greater detail. The appropriate images and part numbers have been added for further clarity of the tool components. |
|
2008-08-15
New Attachments - Greater Capability
|
|
Mazco has expanded the Safe-T-Stopper capability to service and remove street type threaded tees up to 2”. A new lower housing and main seal allows for the street tees to be unthreaded from the cast iron or steel mains and a plug threaded in its place. We can even put in a new threaded tee and sch 80 pipe nipple in place of the old tee. Upgrading and insertions of service lines can be done safely and cost effectively. |
|
2008-03-18
Tool Improvements
|
|
Based on customer feedback we are pleased to announce that we have modified the expander tool shaft size to enter small bore home made 3/4" service tees and 3/4" Mueller No-Blow service tees. This change no longer requires the use of the expander tool extention. |
|
2007-05-29
New capability
|
|
Safe-T-Stopper™ is now also availabel to adapt on to 1" and 1¼" threaded street tee service connections. Tees that are threaded into couplings on steel mains or threaded directly into cast iron can now be removed without the realese of natural gas. |